Content for FT232RL

FT232RL

The FT232R is the latest device to be added to FTDI’s range of USB UART interface Integrated Circuit Devices. The FT232R is a USB to serial UART interface with optional clock generator output, and the new FTDIChip-ID™ security dongle feature. In addition, asynchronous and synchronous bit bang interface modes are available. USB to serial designs using the FT232R have been further simplified by fully integrating the external EEPROM, clock circuit and USB resistors onto the device. The FT232R adds two new functions compared with its predecessors, effectively making it a "3-in-1" chip for some application areas. The internally generated clock (6MHz, 12MHz, 24MHz, and 48MHz) can be brought out of the device and used to drive a microcontroller or external logic. A unique number (the FTDIChip-ID™) is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle which can be used to protect customer application software from being copied.

Description Source

Project  Portable Hacking Station RPI Zero W (Like Watch Dogs)

Portable Hacking Station RPI Zero W (Like Watch Dogs)

“Station to perform WiFi network audits, using Raspberry Pi Zero W and Raspberry Pi 3, with connection from the BT or mobile data cell phone. Story A station to perform WiFi network audits, using Raspberry Pi Zero W and Raspberry …

Project  Bit-Bang FTDI USB-To-Serial Converters To Drive SPI Devices

Bit-Bang FTDI USB-To-Serial Converters To Drive SPI Devices

“The FT232 USB-to-serial converter is one of the most commonly-used methods of adding USB functionality to small projects, but recently I found that these chips are capable of sending more than just serial signals. With some creative programming, individual …

Project  DIY Virtual Alike NEST Thermostat with Node-RED

DIY Virtual Alike NEST Thermostat with Node-RED

“Create your own DIY virtual alike NEST thermostat to set and control the temperature of your home wherever you are from your desired device. Hi all! What´s up Makers?! This is my first project I would like to share …

Project  BIGLID - Big LED Interactive Display

BIGLID - Big LED Interactive Display

“The Big LED Interactive Display is a interactive real time LED Matrix display equipped with a Microsoft Kinect Sensor.”

Project  HC-05 bluetooth programmer

HC-05 bluetooth programmer

“To build this programmer you will need Parts: 1xFTDI232RL1xLP2985AIM 3.3 2x 0.1uF 1206 - ceramic capacitors2x 0R 12062x 0.1uF 0805 - ceramic capacitors4x 1k 0805 - resistors 2x 120R 0805- resistors 2x 3mm led for indication ( Green led - power, Red …