Other
“In this Instructables Ive come with an idea that can be implemented to existing 3d printed prosthetic hands. In existing electrically powered prosthesis I Couldnt find the use of capacitive touch sensing technology for the actuation of fingers. This project …
“I2C is a serial protocol used to communicate a microcontroller with external peripherals attached to the same circuit. Each peripheral must have a unique ID number called address that is used to identify it as the intended recipient of a …
“This is a very simple application of a neural net solution for controlling a two wheeled self balancing robot. The robot does not do anything more than self balance; no control for directional control. But the project was simply to …
“This is an Arduino based project using an NTC thermistor to collect temperature data and Python 3 to save and visualize it. This is a very simple project where we will use an ntc thermistor as a temperature captor an …
“Hi, here I am making a prosthetic hand controlled by servos to make it grip. I am making a right hand but I included the files to print a left palm as well. The assembly is the same for both …
“The solar tracking works on the principal of astronomical equations. With the help of the equation it calculates the coordinates of the sun by calculating the elevation and azimuth angle given the latitude, longitude and time zone of a given …
“Hello everyone, i have tested a MPU6050 gyro sensor. And i decided to simulate some sand in a box. I have used the following components: MPU6050 gyro sensor breadbord arduino 32x8 led matrix”
“Earthquake Detector using Arduino and MPU6050 sensor: Earthquake detector is a device that detects earthquake shocks. According to research, approximately 800,000 earthquakes occurs in a year which kills so many lives and destroys buildings. Our project is a small …
“FANtastic is a “flirty” robot. It gets your attention by making a beeping sound and calling you to come closer, but when you go to have a look, it stops working, its nose changes colour from green to red and …
“Phil and I have been working on this one for a long time. We’re calling it ZIPY: Zippy Inverted Pendulum Yakshave. We finally succeeded in controlling an inverted pendulum. It swings up and balances. Would ya look at that …