Other
“Tables are useful items to have and as we needed a new coffee table for the lounge it made sense to build my own with a few extra electronic features.”
“What you’ll need: Access to a laser cutter - You’ll really need this because most parts are made with a laser cutter. Access to a soldering kit Youll really need a soldering kit. If you dont have one or …
“This project uses a Raspberry Pi, a PmodACL2, an RGB LED, a Digilent PCB Ruler, and LabVIEW MakerHub LINX in order to change the color of the LED depending on the acceleration measured. The front panel is also updated to …
“A simple controller for a RGB LED strip, with independent control of color and intensity. The design is based on a simple STM32F0 microcontroller. It can handle NeoPixel and DotStar protocols, and the power supply can vary from 5V to …
“In my last post Ive described the design and construction of my LED dimmer project. This project here is similar but a bit more involved. It controls RGB LEDs so it can not only change the brightness but also the …
“Charliecube is a 4x4x4 tri-color LED Cube designed and created by Asher Glick and Kevin Baker. But what makes it special? Other cubes use shift registers, decade counters, or other components to control all the LEDs and can cost upwards …
“Use ultra thin digital LED strip and acrylic tube to build a LED pyramid and control it with computer with the blinkytape controller”
“This Instructable is for making a programmable Pumpkin light with an ATTiny microcontroller. This was designed as a learning demo to introduce anyone (age 8+) into electronics and programming microcontrollers using the Arduino IDE.”
“I was bored so I started to fiddle around with transistors. The reason this became a LED fade and constant current circuit is just because the parts were at hand and lights in different colors is always cool. Please see …
“I’m an amateur astronomer tasked with giving an educational talk to fellow amateur astronomers about how to clean optical surfaces like the lenses of eyepieces and telescopes. I wanted to run a small experiment cleaning some uniform glass samples …
“As rahulkar mentioned in his tutorial, LED control seems to be the “Hello World” of electronics. It’s easy to set up, you learn a lot about how electronics work, and in the end, you’ve got a nifty little …